I love our master bathroom. It's clean, airy and spacious. But, it was missing something. We have a huge builder-grade, wall-to-wall mirror. It bounces around tons of light, but I thought it would look nicer if it were framed. Frames for a mirror that size were cost prohibitive, and buying a new mirror seemed unnecessary, so I decided to make my own.
I used the last remaining days before I went back to work to make this happen. Luckily my friend Dani was on maternity leave and was game to help me out. We headed to Home Depot to gather supplies.
There are a lot of great tutorials online already, so I won't try and recreate one here. I followed Blue Cricket Design's tutorial pretty closely. I'll just add in a couple of pointers. First, I used pre-primed moulding. It costs a little bit more, but I liked the decorative elements and it saved me time.
I grabbed a twelve-foot piece and cut it down to size myself. It took a while--so long, in fact that a contractor who kept offering to help me managed to practically cut down an entire forest while I was still cutting my first piece. But, sometimes the pride that comes with doing it yourself is worth the extra time and muscle pains.
After what felt like hours in Home Depot waiting for help with paint (long story...short version is that the perfect brown paint is really, really hard to come by), we headed back to my house. We used Dani's miter saw to cut the moulding into 45 degree angles to form the frame.
We diverged from the tutorial a little bit in the next step because my mirror had big plastic clips that would prevent the frame from sitting flush against the mirror. We measured the clips and used Dani's Dremel tool to notch etches in the two sides of the frame. Sidenote: how amazing is Dani? Woodworking while baby wearing? That's a truly modern woman.*
After taking the wood upstairs to make sure the cuts were accurate and the pieces fit together, we started painting. I painted the backs and fronts of the wood so bare wood wouldn't reflect in the mirror once hung.
When all three coats were dry, it was time to hang the frame. Here's where things didn't go so well. We followed the directions in the tutorial and used liquid nails to hang the wood. All the pieces fit perfectly together, but the painters tape was not enough to keep them from sliding town.
In the morning I caulked and painted the corners to make the seams less noticeable.
* All safety precautions were taken to ensure the baby was not harmed in any way.
 |
| Before |
There are a lot of great tutorials online already, so I won't try and recreate one here. I followed Blue Cricket Design's tutorial pretty closely. I'll just add in a couple of pointers. First, I used pre-primed moulding. It costs a little bit more, but I liked the decorative elements and it saved me time.
I grabbed a twelve-foot piece and cut it down to size myself. It took a while--so long, in fact that a contractor who kept offering to help me managed to practically cut down an entire forest while I was still cutting my first piece. But, sometimes the pride that comes with doing it yourself is worth the extra time and muscle pains.
After what felt like hours in Home Depot waiting for help with paint (long story...short version is that the perfect brown paint is really, really hard to come by), we headed back to my house. We used Dani's miter saw to cut the moulding into 45 degree angles to form the frame.
We diverged from the tutorial a little bit in the next step because my mirror had big plastic clips that would prevent the frame from sitting flush against the mirror. We measured the clips and used Dani's Dremel tool to notch etches in the two sides of the frame. Sidenote: how amazing is Dani? Woodworking while baby wearing? That's a truly modern woman.*
After taking the wood upstairs to make sure the cuts were accurate and the pieces fit together, we started painting. I painted the backs and fronts of the wood so bare wood wouldn't reflect in the mirror once hung.
When all three coats were dry, it was time to hang the frame. Here's where things didn't go so well. We followed the directions in the tutorial and used liquid nails to hang the wood. All the pieces fit perfectly together, but the painters tape was not enough to keep them from sliding town.
In the morning I caulked and painted the corners to make the seams less noticeable.
I don't love how the corners turned out, but overall I'm pretty happy with the outcome. The whole project only cost around $50. The biggest expense was for moulding, which came in at $33.
For not very much money, and a little bit of effort, the room looks so much more finished. Hooray for fun DIY activities with good friends!
Well, who would’ve ever thought that just a few bits of determination and planning would result into something such as this? I love the work you’ve done in framing that mirror, it simply looks lovely. I might try your tips sometime should I deem to frame a certain mirror of my own! Thank you for sharing!
ReplyDeleteLynne Hollaran @ Suburban Glass Service, Inc.
Lynne, what a nice comment! Thank you for your lovely compliment. Happy DIY-ing!
Delete